28' Sheet and Post Van

AIR-RIDE, ROLL-DOOR

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 8.53 m 28′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 762 mm 30”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,515 mm 99”
Inside Height 2,718 mm 107”
Cubic Capacity 58.62 m3 2,070 ft3
Weight (+/- 3%) 3,629 kg 8,000 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,489 mm 98”
Height (in) 2,667 mm 105”
MECHANICS
Suspension Fixed single axle with Air-Ride suspension. Airbags equipped with self-regulating height control valve and manual dump valve
Axles 5/8″ axle wall, 25,000 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Refrigeration Unit AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel “A” slotted logistics posts
Roof One piece aluminum roof
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plastic coated roll-door with 60″ door-track protectors
Side Door(s) One swing-door on curbside, located 159-1/2″ from nose of trailer to center of door
Side Door Access 2 rung, fixed step and grab-handle
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside
SPRING-RIDE, ROLL-DOOR

28 ft
Spring-Ride, Roll-Door

Sheet & Post Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 8.53 m 28′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 762 mm 30”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,515 mm 99”
Inside Height 2,718 mm 107”
Cubic Capacity 58.62 m3 2,070 ft3
Weight (+/- 3%) 3,629 kg 8,000 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,489 mm 98”
Height (in) 2,667 mm 105”
MECHANICS
Suspension Fixed single axle with 3 leaf-spring suspension
Axles 1/2″ axle wall, 22,500 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel “A” slotted logistics posts
Roof One piece aluminum roof
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plastic coated roll-door with 60″ door-track protectors
Side Door(s) One swing-door on curbside, located 159-1/2″ from nose of trailer to center of door
Side Door Access 2 rung, fixed step and grab-handle
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside

28' Sheet and Post Van

14' HIGH CUBE, SPRING-RIDE, SWING-DOOR

53 ft
High Cube, Spring-Ride, Swing Door

53′ Sheet & Post Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,267 mm 14′ 0”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,540 mm 100”
Inside Height 2,946 mm 116”
Cubic Capacity 120.91 m3 4,270 ft3
Weight (+/- 3%) 6,604 kg 14,560 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 29,883 mm 98′ 1/2”
Height (in) 2,946 mm 116”
MECHANICS
Suspension Full slide range, variable-position tandem axles with spring-ride suspension.
Axles 1/2″ axle wall, 22,500 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel posts on 16″ centers
Roof .040 aluminum
Floor 1-1/4″ heavy duty aluminum with two nailing strips and a 24″ deep aluminum threshold plate
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plymetal construction swing-doors, with 5 hinges and 1 locking-rod per door
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside
AIR-RIDE, ROLL-DOOR

53 ft
Air-Ride, Roll-Door

Sheet & Post Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,540 mm 100”
Inside Height 2,794 mm 110”
Cubic Capacity 113.41 m3 4,005 ft3
Weight (+/- 3%) 6,668 kg 14,700 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,388 mm 94”
Height (in) 2,642 mm 104”
MECHANICS
Suspension Full slide range, variable-position tandem axles with Air-Ride suspension. Airbags equipped with self-regulating height control valve and manual dump valve
Axles 5/8″ axle wall, 25,000 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel “A” slotted logistics posts
Roof One piece translucent roof with 30% translucency
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plastic coated roll-door with 60″ door-track protectors
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside
AIR-RIDE, SWING-DOOR

53 ft
Air-Ride, Swing-Door

Sheet & Post Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,540 mm 100”
Inside Height
Cubic Capacity 113.41 m3 4,005 ft3
Weight (+/- 3%) 6,577 kg 14,500 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 29,883 mm 98′ 1/2”
Height (in) 2,794 mm 110”
MECHANICS
Suspension Full slide range, variable-position tandem axles with Air-Ride suspension. Airbags equipped with self-regulating height control valve and manual dump valve
Axles 5/8″ axle wall, 25,000 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel “A” slotted logistics posts
Roof One piece translucent roof with 30% translucency
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plymetal construction swing-doors, with 5 hinges and 1 locking-rod per door
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside
SPRING-RIDE, ROLL-DOOR

53 ft
Spring-Ride, Roll-Door

Sheet & Post Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,540 mm 100”
Inside Height 2,794 mm 110”
Cubic Capacity 113.41 m3 4,005 ft3
Weight (+/- 3%) 6,486 kg 14,300 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,388 mm 94”
Height (in) 2,642 mm 104”
MECHANICS
Suspension Full slide range, variable-position tandem axles with spring-ride suspension.
Axles 1/2″ axle wall, 22,500 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel posts on 24″ centers, 12″ or 16″ centers from landing gear forward
Cargo Control 1 row of “E” track (full length, both sides) located 48″ from floor
Roof One piece translucent roof with 30% translucency
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plastic coated roll-door with 60″ door-track protectors
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside
SPRING-RIDE, SWING-DOOR

53 ft
Spring-Ride, Swing-Door

Sheet & Post Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,540 mm 100”
Inside Height 2,794 mm 110”
Cubic Capacity 113.41 m3 4,005 ft3
Weight (+/- 3%) 6,350 kg 14,000 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 29,883 mm 98′ 1/2”
Height (in) 2,794 mm 110”
MECHANICS
Suspension Full slide range, variable-position tandem axles with spring-ride suspension.
Axles 1/2″ axle wall, 22,500 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel posts on 24″ centers, 12″ or 16″ centers from landing gear forward
Roof One piece translucent roof with 30% translucency
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plymetal construction swing-doors, with 5 hinges and 1 locking-rod per door
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside

Auto Drop Van

53' AIR-RIDE, SWING-DOOR

53 ft
Air-Ride, Swing-Door

Auto Drop Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Deck Length – Front Deck 3,353 mm 11′ 0”
Deck Length – Rear Deck 12,497 mm 41′ 0”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 889 mm 35”
Inside Width (at liner) 2,515 mm 99”
Inside Height (front of drop) 2,731 mm 107.5”
Inside Height (rear of drop) 3,188 mm 125.5”
Cubic Capacity 123.74 m3 4,370 ft3
Weight (+/- 3%) 7,847 kg 17,300 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,489 mm 98”
Height (in) 3,175 mm 125”
MECHANICS
Suspension Fixed position tandem axles with Air-Ride suspension. Airbags equipped with self-regulating height control valve and manual dump valve
Axles 5/8″ axle wall, 25,000 lb. capacity with synthetic wheel-end lubricant
Tires 215/75R 17.5 premium radial tires
Wheels 6.75″ x 17.5″ steel stud-piloted wheels
Brakes 12-1/4″ x 7-1/2″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up and 5th-wheel plates. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes
Posts Galvanized steel posts on 24″ centers, 12″ centers from landing gear forward
Roof One piece aluminum roof
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmembe
Scuff Sides: 2 rows of 16″ x 3/16″ flat steel located at floor line and 60″ above floor. Roof: 4 rows of galvanized steel scuff liner. Face of Drop: 1″ hardwood overlaid with flat steel plate, full height and width
Rear Doors 3/4″ plymetal construction swing-doors, with 6 hinges and 2 locking-rods per door
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside

Electronics Drop Van

48' AIR-RIDE, SWING-DOOR

48 ft
Air-Ride, Swing-Door

Electronics Drop Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 14.63 m 48′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Deck Length – Front Deck 3,353 mm 11′ 0”
Deck Length – Rear Deck 10,973 mm 36′ 0”
Overall Height 152 mm 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,041 mm 41”
Inside Width (at liner) 2,515 mm 99”
Inside Height (front of drop) 2,743 mm 108”
Inside Height (rear of drop) 3,048 mm 120”
Cubic Capacity 108.65 m3 3,837 ft3
Weight (+/- 3%) 7,257 kg 16,000 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,489 mm 98”
Height (in) 2,972 mm 117”
MECHANICS
Suspension Fixed position tandem axles with Air-Ride suspension. Airbags equipped with self-regulating height control valve and manual dump valve
Axles 5/8″ axle wall, 25,000 lb. capacity with synthetic wheel-end lubricant
Tires 255/70R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up and 5th-wheel plates. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes
Posts Galvanized steel, double slotted “A” logistics posts
Cargo Control 8′ double slotted “E” track at rear, located 48″ from floor
Roof One piece aluminum roof
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner
Rear Doors 3/4″ plymetal construction swing-doors, with 6 hinges and 2 locking-rods per door
Side Door Access Two 48″ wide swing-doors on curbside, located 208″ and 379-1/2″ from nose of trailer to center of doors. One 96″ wide double door on roadside, located 305-1/2″ from nose of trailer to center of doors
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside
53' AIR-RIDE, SWING-DOOR

53 ft
Air-Ride, Swing-Door

Electronics Drop Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Deck Length – Front Deck 3,353 mm 11′ 0”
Deck Length – Rear Deck 12,497 mm 41′ 0”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,041 mm 41”
Inside Width (at liner) 2,515 mm 99”
Inside Height (front of drop) 2,743 mm 108”
Inside Height (rear of drop) 3,048 mm 120”
Cubic Capacity 120.40 m3 4,252 ft3
Weight (+/- 3%) 8,482 kg 18,700 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,489 mm 98”
Height (in) 2,972 mm 117”
MECHANICS
Suspension Fixed position tandem axles with Air-Ride suspension. Airbags equipped with self-regulating height control valve and manual dump valve
Axles 5/8″ axle wall, 25,000 lb. capacity with synthetic wheel-end lubricant
Tires 255/70R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up and 5th-wheel plates. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes
Posts Galvanized steel, double slotted “A” logistics posts
Cargo Control 8′ double slotted “E” track at rear, located 48″ from floor
Roof One piece aluminum roof
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner
Rear Doors 3/4″ plymetal construction swing-doors, with 6 hinges and 2 locking-rods per door
Side Door(s) Two 48″ wide swing-doors on curbside, located 207-1/2″ and 423-1/2″ from nose of trailer to center of doors. One 96″ wide double door on roadside, located 305-1/2″ from nose of trailer to center of doors
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside

Plate Van

53' AIR-RIDE, SWING-DOOR

53 ft
Air-Ride, Swing-Door

Plate Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,565 mm 101”
Inside Height 2,794 mm 110”
Cubic Capacity 114.97 m3 4,060 ft3
Weight (+/- 3%) 6,577 kg 14,500 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,515 mm 99”
Height (in) 2,794 mm 110”
MECHANICS
Suspension Full slide range, variable-position tridem axles with Air-Ride suspension. Airbags equipped with self-regulating height control valve and manual dump valve
Axles 5/8″ axle wall, 25,000 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Aluminum “A” slotted logistics posts, 5 additional sidewall stiffeners per side
Roof One piece aluminum roof
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 6″ aluminum scuff, integral with bottom rail. 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plymetal construction swing-doors, with 5 hinges and 2 locking-rods per door
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside
53' SPRING-RIDE, SWING-DOOR

53 ft
Spring-Ride, Swing-Door

Plate Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,565 mm 101”
Inside Height 2,794 mm 110”
Cubic Capacity 114.97 m3 4,060 ft3
Weight (+/- 3%) 6,396 kg 14,100 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,515 mm 99”
Height (in) 2,794 mm 110”
MECHANICS
Suspension Full slide range, variable-position tandem axles with spring-ride suspension.
Axles 1/2″ axle wall, 22,500 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Aluminum “A” slotted logistics posts, 5 additional sidewall stiffeners per side
Roof One piece aluminum roof
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 6″ aluminum scuff, integral with bottom rail. 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plymetal construction swing-doors, with 5 hinges and 2 locking-rods per door
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside

Liftgate Van

28' AIR-RIDE, ROLL-DOOR

28 ft
Air-Ride Roll-Door

Liftgate Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 8.53 m 28′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 762 mm 30”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,515 mm 99”
Inside Height 2,718 mm 107”
Cubic Capacity 58.62 m3 2,070 ft3
Weight (+/- 3%) 4,581 kg 10,100 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,489 mm 98”
Height (in) 2,667 mm 105”
MECHANICS
Suspension Fixed single axle with Air-Ride suspension. Airbags equipped with self-regulating height control valve and manual dump valve
Axles 5/8″ axle wall, 25,000 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel “A” slotted logistics posts
Roof One piece aluminum roof
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plastic coated roll-door with 60″ door-track protectors
Rear Door Access Hydraulic Rail-Lift, with 5,000 lb. Capacity
Side Door(s) One swing-door on curbside, located 159-1/2″ from nose of trailer to center of door
Side Door Access 2 rung, fixed step and grab-handle
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside
28' SPRING-RIDE, ROLL-DOOR

28 ft
Spring-Ride, Roll-Door

Liftgate Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 8.53 m 28′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 762 mm 30”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,515 mm 99”
Inside Height 2,718 mm 107”
Cubic Capacity 58.62 m3 2,070 ft3
Weight (+/- 3%)
DOOR OPENING METRIC IMPERIAL
Width (in) 2,489 mm 98”
Height (in) 2,667 mm 105”
MECHANICS
Suspension Fixed single axle with 3 leaf-spring suspension
Axles 1/2″ axle wall, 22,500 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel “A” slotted logistics posts
Roof One piece aluminum roof
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plastic coated roll-door with 60″ door-track protectors
Rear Door Access Hydraulic Rail-Lift, with 5,000 lb. Capacity
Side Door(s) One swing-door on curbside, located 159-1/2″ from nose of trailer to center of door
Side Door Access 2 rung, fixed step and grab-handle
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside
48' SPRING-RIDE, ROLL-DOOR

48 ft
Spring-Ride, Roll-Door

Liftgate Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 14.63 m 48′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,540 mm 100”
Inside Height 2,794 mm 110”
Cubic Capacity 101.09 m3 3,570 ft3
Weight (+/- 3%) 6,759 kg 14,900 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,388 mm 94”
Height (in) 2,642 mm 104”
MECHANICS
Suspension Full slide range, variable-position tandem axles with spring-ride suspension.
Axles 1/2″ axle wall, 22,500 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel posts on 24″ centers, 12″ or 16″ centers from landing gear forward
Cargo Control 1 row of “E” track (full length, both sides) located 48″ from floor
Roof One piece translucent roof with 30% translucency
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plastic coated roll-door with 60″ door-track protectors
Rear Door Access Hydraulic Rail-Lift, with 5,000 lb. Capacity
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside
53' AIR-RIDE, ROLL-DOOR

53 ft
Air-Ride, Roll-Door

Liftgate Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,540 mm 100”
Inside Height 2,794 mm 110”
Cubic Capacity 113.41 m3 4,005 ft3
Weight (+/- 3%) 7,711 kg 17,000 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,388 mm 94”
Height (in) 2,642 mm 104”
MECHANICS
Suspension Full slide range, variable-position tandem axles with Air-Ride suspension. Airbags equipped with self-regulating height control valve and manual dump valve
Axles 5/8″ axle wall, 25,000 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember moun
Posts Galvanized steel “A” slotted logistics posts
Roof One piece translucent roof with 30% translucency
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plastic coated roll-door with 60″ door-track protectors
Rear Door Access Hydraulic Rail-Lift, with 5,000 lb. Capacity
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers, single-pole charging receptacle for liftgate
Air Connections Swivel gladhands mounted on roadside
53' SPRING-RIDE, ROLL DOOR

53 ft
Spring-Ride, Roll-Door

Liftgate Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,540 mm 100”
Inside Height 2,794 mm 110”
Cubic Capacity 113.41 m3 4,005 ft3
Weight (+/- 3%) 7,439 kg 16,400 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,388 mm 94”
Height (in) 2,642 mm 104”
MECHANICS
Suspension Full slide range, variable-position tandem axles with spring-ride suspension.
Axles 1/2″ axle wall, 22,500 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel posts on 24″ centers, 12″ or 16″ centers from landing gear forward
Cargo Control 1 row of “E” track (full length, both sides) located 48″ from floor
Roof One piece translucent roof with 30% translucency
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plastic coated roll-door with 60″ door-track protectors
Rear Door Access Hydraulic Rail-Lift, with 5,000 lb. Capacity
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers, single-pole charging receptacle for liftgate
Air Connections Swivel gladhands mounted on roadside

Roller-Bed Van

53' AIR-RIDE, SWING-DOOR

53 ft
Air-Ride, Swing-Door

Roller-Bed Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,540 mm 100”
Inside Height 2,794 mm 110”
Cubic Capacity 113.41 m3 4,005 ft3
Weight (+/- 3%) 6,622 kg 14,600 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,502 mm 98.5”
Height (in) 2,794 mm 110”
MECHANICS
Suspension Full slide range, variable-position tandem axles with Air-Ride suspension. Airbags equipped with self-regulating height control valve and manual dump valve
Axles 5/8″ axle wall, 25,000 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 2 sensor / 1 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up and 5th-wheel plates. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel “A” slotted logistics posts
Roof One piece translucent roof with 30% translucency
Floor Pneumatic roller track floor system
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plymetal construction swing-doors, with 5 hinges and 1 locking-rod per door
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside

Tridem Van

53' AIR-RIDE, SWING-DOOR

53
Air-Ride, Swing-Door

Tridem Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,540 mm 100”
Inside Height 2,794 mm 110”
Cubic Capacity 113.41 m3 4,005 ft3
Weight (+/- 3%) 7,666 kg 16,900 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,502 mm 98.5”
Height (in) 2,794 mm 110”
MECHANICS
Suspension Full slide range, variable-position tridem axles with Air-Ride suspension. Airbags equipped with self-regulating height control valve and manual dump valve
Axles 5/8″ axle wall, 25,000 lb. capacity with synthetic wheel-end lubricant
Axle Spread 72″
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 4 sensor / 2 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 12″ centers with additional crossmembers at rear on 8″ centers. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel “A” slotted logistics posts
Roof One piece translucent roof with 30% translucency
Floor 1-3/8″ laminated hardwood floor secured by 3 screws per board at each crossmember
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plymetal construction swing-doors, with 5 hinges and 1 locking-rod per door
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside
53' SPRING-RIDE, SWING-DOOR (2003+)

53 ft
Spring-Ride, Swing Door

Tridem Van

Trailer specification features may vary based upon model year, trailer type and location. Equipment is subject to availability at each location.

EQUIPMENT SPECIFICATIONS

DIMENSIONS METRIC IMPERIAL
Overall Length 16.15 m 53′
Overall Width 2,591 mm 102”
Overall Frame Width 2,591 mm 102”
Overall Height 4,115 mm 13′ 6”
Coupler Height 1,194 mm 47”
Kingpin Setting 914 mm 36”
Dock Height 1,270 mm 50”
Inside Width (at liner) 2,540 mm 100”
Inside Height 2,794 mm 110”
Cubic Capacity 113.41 m3 4,005 ft3
Weight (+/- 3%) 7,711 kg 17,000 lbs
DOOR OPENING METRIC IMPERIAL
Width (in) 2,502 mm 98.5”
Height (in) 2,794 mm 110”
MECHANICS
Suspension Full slide range, variable-position tridem axles (60″ centers) with spring-ride suspension.
Axles 1/2″ axle wall, 22,500 lb. capacity with synthetic wheel-end lubricant
Tires 295/75R 22.5 premium radial tires
Wheels 8.25″ x 22.5″ steel hub-piloted wheels
Brakes 16-1/2″ x 7″ x 3/4″ s-cam, quick-change brake shoes
ABS 4 sensor / 2 modulator-valve system
Upper Coupler AAR certified coupler with 1/4″ pick-up plate and 5/16″ 5th-wheel plate. Interior coupler surfaces sealed with corrosion resistant coating
Crossmembers 4″ steel I-beam crossmembers on 8″ centers throughout. Inverted-hat crossmembers from landing gear forward
Landing Gear AAR certified, 2-speed landing gear with internal gearbox and tilt-cushion sand shoes. 5 crossmember mount
Posts Galvanized steel posts on 24″ centers, 12″ or 16″ centers from landing gear forward
Roof .040 aluminum
Skylights Three 4″ round skylights per side, located below top rail, evenly spaced front to rear
Floor 1-1/4″ heavy duty aluminum floor with two nailing strips
Scuff 12″ fluted aluminum side scuff-liner with a 12″ Flat Steel Plate in nose of trailer
Rear Doors 3/4″ plymetal construction swing-doors, with 5 hinges and 1 locking-rod per door
Lights & Wiring Sealed-beam lights with a fully sealed wiring harness and internal ground
Electrical Connections 7-way ATA plug with no circuit breakers
Air Connections Swivel gladhands mounted on roadside

We deliver peace of mind, your freight's included!

With our extensive knowledge of logistics and transport systems, including 15 years of experience, we guarantee 100% safe delivery with our highly modernized fleet, from local to nation wide capabilities.

Support

24/7 Support
+ 1 (909) 479-1228

Location

13038 Melon Ave
Chino, CA 91710

Copyright © 2019 TPrime Logistics INC. / All rights reserved